Configure Raspberry Pi Composite Video Output for old TVs

Raspberry Pi comes with the composite video output configured to NTSC by default and older TVs aren’t able to detect that and change the format to PAL for example. In that case in a PAL TV youl’ll see the image in black and white:

ntsc-signal-on-an-old-pal-tv

You can reconfigure the output mode using the “sdtv_mode” option in /boot/config.txt. This are the available options:

  • 0: Normal NTSC
  • 1: Japanese version of NTSC – no pedestal
  • 2: Normal PAL
  • 3: Brazilian version of PAL – 525/60 rather than 625/50, different subcarrier

So for my TV I configured it to 2:

sdtv_mode=2

There are more configuration options for composite video in the official RPiconfig documentation.

You might also like

Fix no video problem in XBMC
Although is recommended using a dedicated media center distribution (raspbmc, openelec or xbian for example)...

Using screen to leave processes running in a terminal
If you are using an SSH connection and run a command that takes very long to process you can use nohup...

Using screen to leave processes running in a terminal
If you are using an SSH connection and run a command that takes very long to process you can use nohup...

Fix black screen in Raspberry Pi with HDMI to VGA adapter
If you use an HDMI to VGA adaptor and get a black screen you may tweak the config.txt to solve the problem.If...

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.